Digit Bt.
Botfalu utca 7., Budapest, 1112
+36-1-224-0360
order@digit.hu
Digit Bt. | +36-1-224-0360 | order@digit.hu
DecorFlex Coat Hybrid is an extremely flexible and durable weather-resistant multipolymer coating for EPS and XPS facade profiles. Door- and window frames, decorative elements, cornices, crown mouldings, belt profiles, sill profiles can be covered with this protective coating with the help of an automatic Foam Mouldings Coating Machine.
Can be used outside and inside. Nanopolymer coating.
The material must be mixed bubble-free with a low-speed, high-powered mixer.The DecorFlex Coat must not be thinned. For a material thickness of 2.5 mm, 5 kg of Hybrid coating is sufficient for 1 m2.We recommend our DecorFlex Premix adhesive and quartz sand combination for the manual coating of wedge stones, arched crowns, triangular crowns and other elements that cannot be coated by machine.
DecorFlex Coat Hybrid 03 Foam Protective Coating is great for sticking architectural molding profiles and gluing them together and to fix them onto the wall or outdoor building plaster. It gives excellent results in the form of no cracks at the joints.
How to apply
Before applying the mass use a slow-rotating drilling machine equipped with a stirrer for mixing. The mass must not be diluted. Do the job at an ambient temperature.Mixing time: 5 minutes at 650 rpm using a vaned disk.Drying temperature: 15°C - 25°C, drying time: 24h/1mm. After complete drying gives up her grind.Clean tools with tap water immediately after completion of the works.
Storage, safety
