-
-
-
Prijava
-
Nr.63 sečiva žica WOOL WTT 1,5/1,7mm
Specijalna žica za sečenje za brze rezače pene.
Unesite dužinu beskonačne petlje u mm.
Cena varira u zavisnosti od raspona veličina, izaberite i odgovarajući raspon veličina. Navedena cena se odnosi na 1 komad.
Broj komada mora biti naveden za količinu porudžbine.
65,00 EUR + PDV
Količinski popust:
1+
komad
-
65,00 EUR + PDV
11+
komad
-10%
58,50 EUR + PDV
21+
komad
-20%
52,00 EUR + PDV
51+
komad
-25%
48,75 EUR + PDV
151+
komad
-30%
45,50 EUR + PDV
Detalji
Skladištenje u tečnom ulju se preporučuje za sve tipove.
Smer sečenja je označen malom strelicom.
Podaci
.
Materijal
čelika
Premaz
volfram
Dužina petlje
2 000 – 13 000 mm
Šta možete da isečete sa njim?
kamena vuna (MW)
Boja
siva
Debljina / prečnik
1,7 mm
Model (SKU)
FW-NR-63
Težina
250 g/komad
Best for foams
- stone wool
The best wire to cut Rockwool is Nr.63 WOOL WTT (covered by Tungsten).
| code | wire name | features | material density | diameter | product range |
|---|---|---|---|---|---|
| Nr.60 | WOOL | Standard steel cutting wire. | 80-100 kg/m3 | 1.5/1.7mm | high level of carbon |
| Nr.61 | WOOL R | Standard steel cutting wire, faster cutting, but produces more dust. | 80-100 kg/m3 | 1.5/1.7mm | high level of carbon |
| Nr.65 | WOOL/400 | High roughness steel cutting wire, suitable for high densities. | >100 kg/m3 | 1.5/1.7mm | high level of carbon |
| Nr.62 | WOOL DOUBLE RING | Standard steel cutting wire, double spiral, more resistant. | 80-100 kg/m3 | 1.5/1.7mm | high level of carbon |
| Nr.63 | WOOL WTT | Steel wire with tungsten coating for increased durability, higher strength, and high cutting performance. | for all densities also >100 kg/m3 |
1.5/1.7mm | tungsten |
| Nr.66 | WOOL WTT R | Steel wire with tungsten coating for increased durability, higher strength, and high cutting performance. Intermediate roughness and provides a faster cut. |
for high densities >100 kg/m3 |
1.5/1.7mm | tungsten |
| Nr.64 | WOOL WTT/400 | Steel wire with tungsten coating for increased durability, higher strength, and high cutting performance. Maximum roughness and provides a faster cut. |
For high densities >100 kg/m3 |
1.5/1.7mm | tungsten |
Advantages
WTT: tungsten (special material suitable for cutting very abrasive materials).
↘
Referencia
Recenzije
Budite prvi koji će napisati recenziju!
Srodni proizvodi