Below you can find special abrasive wires for fast wire foam cutter equipment.
"oc" means cutting wire with a Zinc galvanized braid. More resistant to corrosion. Storage in liquid oil is recommended for all types of cutting wires.
Fast wire cutting wires are available in endless loops. When ordering please give the exact length in millimeters. A small arrow shows the working direction.
Code | Name, thickness |
External covering |
Best for foams | |
---|---|---|---|---|
Nr.1 | Spiral 1.1mm (low dust formation) |
![]() |
low-density flexible polyurethane foam (PU) | |
Nr.2 | Spiral 1.2mm | ![]() |
medium density flexible polyurethane foam (PU) | |
Nr.3 | Spiral 1.3mm | ![]() |
high-density flexible polyurethane foam (PU) | |
Nr.4 | Spiral oc 1.3mm | ![]() |
zinc | medium density flexible polyurethane foam (PU) |
Nr.5 | Spiral oc 1.4mm | ![]() |
zinc | high-density flexible polyurethane foam (PU) |
Nr.6 | S 1.5mm | ![]() |
low-density polyethylene foam (PE), low density rebond / chip foam |
|
Nr.7 | SW 1.5mm | ![]() |
low-density polyethene foam (PE), low density rebond / chip foam |
|
Nr.8 | SS 1.8mm | ![]() |
medium density phenolic foam (PF) | |
Nr.9 | SS 1.9mm | ![]() |
high-density phenolic foam (PF) | |
Nr.10 | S oc 1.6mm | ![]() |
zinc | block of corrugated cardboard |
Nr.11 | S oc 2mm | ![]() |
zinc | high-density polyethylene foam (PE), high-density rebond / chip foam |
Nr.12 | X 1.6mm | ![]() |
medium density rigid polyurethane foam (PUR, PIR), medium density rebond / chip foam |
|
Nr.13 | XW 1.6mm | ![]() |
medium density rigid polyurethane foam (PUR, PIR), medium density rebond / chip foam |
|
Nr.14 | Spiral W 1.6mm | ![]() |
low-density fibreglass, low-density Rockwool (MW) |
|
Nr.15 | Spiral W 1.8mm | ![]() |
medium density fibreglass, medium density Rockwool (MW) |
|
Nr.16 | Spiral W 1.9mm | ![]() |
high-density fibreglass, high-density Rockwool (MW) |