Most popular products

SI 136 Matte 160 mikron PP Roll-Up Film 1067mm*50m

SI 136 Matte 160 mikron PP Roll-Up Film 1067mm*50m
SI 136 Matte 160 mikron PP Roll-Up Film 1067mm*50m

SI 136 (SI136) 160 micron whiteback polypropylene film. White matte surface.

High opacity due to internal light blocking layer.

Suitable for most large format inkjet printers using waterbased dye, pigment or latex inks.

Core: 3".

198.11 EUR + VAT
: 3.71 EUR/m2 + VAT
  • high brillance of colours
  • good scratch resistance
  • good flatness
  • good tear strength
  • high opacity
  • matt non reflective
  • PVC-free
  • low-reflective printing surface
  • environmentally friendly PP film
Width [mm]
Material thickness
160 micron
banner, roll-up
50 m
water based pigment, latex, water based dye
Folex - Regulus
Article No.
8 kg/roll
Technical specifications
Coating Printside matte
Coating Backside -
Thickness 0.160 mm +/- 0.005 mm
Core Diameter 76 mm
Opacity ~ 99%
Base Material Polypropylene
Packing quantity 1 roll


 For roll-up systems that fix the poster in the cassette by means of a clamping bar, we recommend a an additional section of film as a pre-tensioning material of approx. 50-80cm in the lower poster area to avoid possible transverse impressions of the clamping bar in the poster, which may occur during storage while the roll up is stored in the cassette.


  • Note for Latex-Inks: To avoid the effect of rewetting (oil film on the print surface due to defective anchorage of ink) it is necessary to establish the optimal drying parameter. This can be done by means of print tests before production print. Rewetting can appear several days after printing when the drying condtions are defective. The rewetting can also be dependent on the given ambient conditions and the composition and consistence of the printing theme. When creating a media profile, this circumstance must be expressly taken into consideration.
  • If dye inks are used, must be laminated indoor and outdoor to improve light-fastness and smudge-proofness.
  • It is necessary to protect the surface if it is subject over a long time to abrasion or any other mechanical influences, to dirt or humidity. The lamination can be done right to the edges or over the edges. The user should check before using what is more appropriate.
  • We recommend to use self-adhesive laminating foils for cold lamination.

Be the first to review this product!